Questions tagged [electrochemistry]

The branch of chemistry that deals with the study of redox reactions and how they can be applied to generate electricity (in electrochemical cells) and to carry out non-spontaneous reactions using electricity (electrolysis).

258 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
9
votes
0answers
121 views

Some materials emit more photoelectrons than others - why?

Again, I'm a physicist turning to chemists (so bear with me). So I've been measuring some materials by changing the wavelength of the incident light on the material and I have a detecting tip like in ...
9
votes
0answers
191 views

Does a zinc metal coating react with coffee in a coffee grinder?

I'm restoring an old coffee grinder and I want to give the grinder mechanism a nice zinc / silver coating. But I read it is not safe for zinc to be in contact with acidic foods. When I look at the ...
7
votes
0answers
104 views

What exactly is an “electron-sponge”?

What exactly an "electron-sponge" [behavior/action/property/system] nickname is, and what makes a material an "electron-sponge" (preferably, quantitatively)? From what I found, it's typically a ...
7
votes
2answers
814 views

Nernst equation for a fuel cell when gases are stored separately

I have run some tests with a PEM fuel cell and the voltage we have found was $1.44\ \mathrm{V}$. Given that the standard potential for a fuel cell is $1.229\ \mathrm{V}$ what is causing the difference ...
7
votes
1answer
436 views

Does phosphoric acid remove stainless steel electropolished layer?

Electropolished stainless steel has a high corrosion resistance due to the oxide film that is created during electropolishing. The film mainly consist of chromium(III) oxide. Phosphoric acid is ...
5
votes
0answers
36 views

Calculating ideal chemical work using extent of reaction and chemical potential

I have a electrochemical reactor assumed isothermal and isobaric with 4 reactions and I am trying to calculate the "ideal chemical work' exerted by each reaction using the extent of reactions for each ...
5
votes
0answers
392 views

What are the factors that affect the redox reactions?

In my work, I used $\ce{Co(OH)2}$ and $\ce{Ni(OH)2}$ as an active materials to fabricate as symmetric supercapacitors in which I used 1-butyl-1-methylpyrrolidinium dicyanamide as an electrolyte. From ...
5
votes
0answers
107 views

Thought Experiment: Is it possible to preserve the charge imbalance present during molten lead(II) bromide electrolysis?

Suppose I were to electrolyse some molten lead(II) bromide. According to what I have been taught, the lead ions travel towards the cathode and are reduced at it, while the bromide ions are oxidised at ...
5
votes
0answers
30 views

Removal of nickel plating on MgB2 without damaging the boride?

I need to remove a nickel plating of a MgB2 wire without causing damage to the MgB2. I felt that electrolysis is the best method but I do not know what electrolyte to use for this. I also need to coat ...
5
votes
0answers
251 views

Reduction of vanadyl ion

I want to reduce vanadyl to vanadium (III), can somebody please suggest some appropriate methods for it? I am trying to make a redox flow battery for a project but I have only vanadyl sulfate.
4
votes
0answers
42 views

Meaning of electrochemical vs nonelectrochemical steps

Can someone please explain to me what is meant by an electrochemical reaction step and how it differs from a nonelectrochemical reaction step in the same overall reaction in the context of ...
4
votes
0answers
615 views

Concept of Limiting Current

I am investigating the current output from an electrochemical cell. The electrochemical cell can be broken down into several stages, for example: Diffusion of reactants across a capillary Diffusion ...
4
votes
0answers
31 views

Is electric current always necessary to make cathodic protection possible?

Can a cathodic protection system still work if there is no current between the anode and cathode?
4
votes
0answers
164 views

Why does the electrolyte used in Lechlanché cell turn blue?

In my school there are jars which are turned into Lechlanché cells. Basically the cell has aqueous ammonium chloride solution as the electrolyte which is obviously transparent in the beginning. The ...
4
votes
0answers
293 views

Conductivity of electrolyte solution

I found a relationship online between the conductivity of electrolyte and current. $$i = F \sum_i z_i N_i = F^2 \left( \sum_i z_i^2 u_i c_i \right)\nabla\phi = -\kappa\nabla\phi \qquad \kappa = F^2 \...
4
votes
0answers
450 views

Why does the open circuit voltage of a battery decrease with increase in pH of electrolyte, but the voltage across a load increase?

I tested a cell which had aluminum sulfate as its anode electrolyte (12 grams aluminum in 50 mL water and a pH of 3.2), and potassium hydroxide as the cathode electrolyte (5 grams of KOH in 200 g of ...
4
votes
0answers
598 views

An alternate purification process for sugar separation form bee honey?

Bee honey contains 75% sugars (Fructose, Glucose, Maltose, Sucrose and others), some water and low amount of different compounds (up to 5%) Wiki. Basic purification is done by addition of phosphoric ...
4
votes
0answers
1k views

Does the temperature of water change during electrolysis?

Applying an electric potential to impure water splits water into its constituents H/O. Does the temperature of the electrolyte change during this electrolysis?
3
votes
0answers
31 views

Cause of imaginary part of Warburg element in EIS

In electrochemical impedance spectroscopy experiments (EIS) the diffusion of electroactive species at flat, macroscopic electrodes is commonly described by the Warburg element with the impedance ...
3
votes
0answers
52 views

Electrolytic cell to remove soft solder from silver?

Hi my chemistry is pretty dire but have vague idea that an electrochemical cell could be used to remove soft solder (lead/tin probably) from a piece of sterling silver in need of a repair. The ...
3
votes
0answers
35 views

Question about the composition of a 1902 non-polarisable electrode diagram by Jagadis Bose

In his work, "Response in The Living and Non-living" (1902); page 6, Jagadis Bose describes a method for detecting nerve response. He explains that he uses iso-electric contacts with no current in the ...
3
votes
0answers
41 views

Choosing electrodes for corrosive environments

Background I'm building a watering robot for my household plants. For the purpose of measuring the moisture content of the plant I intend to use a resisitive approach where I pass an electric current ...
3
votes
0answers
43 views

Removing Tungsten Trioxide from Tungsten Electrode

I need a very sharp tungsten electrode, and I think radial electrochemical etching with sodium hydroxide is the way to go. The problem therein (I think) is that the etching will cause an oxide layer ...
3
votes
0answers
207 views

Does Reduction Potential affect rate of electrolysis

I am currently doing a project on electrolysis, and I was wondering if the reduction potential (ie. $E^0$) will affect the rate of electrolysis. In other words, across different cells with differing $...
3
votes
0answers
118 views

White mucous substance forming around iron paper clip during electrolysis

I'm using a graphite cathode and an iron paper-clip anode, in a saltwater solution, basically to produce rust. I've done this before with no complications, but this time I noticed a white, mucous ...
3
votes
0answers
122 views

Why does chromium metal not react with a solution of Mg^2+ even though their standard cell potentials produce a net positive voltages?

Write net equations for the spontaneous redox reactions that occur during the following or NONE if there is no extensive reaction. Use the lowest possible coefficients. Include states-of-matter under ...
3
votes
0answers
569 views

How to calculate the thickness of the double layer at an electrode

I need help calculating a double layer thickness. In this situation two insulated planar electrodes are placed in an electrolyte (in this case drinking water) and a voltage is applied to them of 10V ...
3
votes
2answers
178 views

Is there a potentiometric method for monitoring salt formation in organic solvent?

I work in a pharmaceutical R+D lab, and currently aim to develop a validatable potentiometric method for determining the optimal amount of acid to add to a basified small organic molecule for ...
3
votes
0answers
40 views

Does Fluoroborate gets used up in Electroplating

I've been working on Tin electroplating on the side for a while now. I've formulated a mix from my usual electroplating formula template. The mix stubbornly keeps on having the Tin ions form Tin ...
3
votes
0answers
61 views

What is the voltage dependence of the thickness of oxide coating through anodising?

In titanium anodising, solid titanium reacts with the oxygen formed at it's surface (to form titanium(IV) oxide or $\ce{TiO2}$) through the electrolysis of water. Experimentation and research has ...
3
votes
0answers
623 views

Calculation of optimal current density

I'm trying to figure out what my optimal current density would be in respect to the limiting current density. How do you calculate concentration polarization and limiting current density in an ...
3
votes
0answers
44 views

How do I calculate the viscosity of a mixture of toluene and isopropanol?

I am trying to understand why my nanoparticles will only electrophoretically deposit in a non-polar solvent and a non-polar/polar solvent mix but not in the polar solvent. I am hoping to use zeta ...
3
votes
0answers
116 views

Photoelectrochemical (PEC) water splitting

I'm starting to prepare for my research project on photoelectrochemical (PEC) splitting of water into H and O using (F doped) titanium dioxide as the photoanode. I've been unsuccessfully searching in ...
3
votes
0answers
375 views

How will the transference number of H+ ion in a dilute solution vary as temperature increases?

I know that transference number depends on Ionic mobility, which depends on temperature. But is there any equation which describes the relation of Transference number and temperature, any ions like H+....
3
votes
2answers
95 views

Why isn't my galvanic cell making enough voltage?

I'm in kind of a pickle here. I made a galvanic cell of Lead and aluminium for a chemistry internal assessment but unfortunately, it didn't turn out so well and neither me nor my teacher has any clue ...
2
votes
0answers
15 views

Is the Standard hydrogen electrode potential at T other than 298K also zero?

The standard hydrogen electrode potential by conventional at 298 K is taken to be 0.00 volts. This is what I have been taught. It talks about SHE at 298 K , so is the hydrogen electrode potential at ...
2
votes
0answers
15 views

Current reversal in galvanic cell according to Nernst equation

In a galvanic cell with zinc, zinc sulphate solution and copper, copper sulphate solution, if at equilibrium concentration of zinc sulphate solution increased/copper sulphate solution decreased, will ...
2
votes
0answers
47 views

How to calculate the value of heat absorption/ heat release during water electrolysis?

The overall reactions with the enthalpies of water electrolysis at room temperature can be represented by the equation below: $$\ce{2H2O + \pu{237.2 kJ mol-1} + \pu{48.6 kJ mol-1} → 2 H2 + O2}$$ ...
2
votes
0answers
50 views

How does a pH glass electrode work?

Every source I read mentions the potential difference building up at the glass membrane (according to the Nernst equation). But how is this difference actually measured? Sticking an electrode into a ...
2
votes
0answers
18 views

Rate of cathodic reaction vs Tafel slope

One of my reference engineering books says that for the cathodic protection process (in seawater): Al $\rightarrow$ Al$^{3+}$ + $3e^-$ (anode, setting the protection potential at about -900 mV SCE) ...
2
votes
1answer
62 views

Why does magnesium deposit during electrolysis of a molten mixture of MgI2 and AlBr3?

During the electrolysis of mixed salts, I read, and was taught, that the cation with a higher ionization energy would deposit at the cathode. I was also told that you cannot use the standard electrode ...
2
votes
0answers
134 views

What is the ideal temperature and pressure to crack water?

Using sun mirrors and solar cells for electricity. What temperature, pressure and voltage ideal for cracking water. Source: NPR Source Would it take more or less electricity to crack water under ...
2
votes
0answers
16 views

Why do electrocatalysts based on polyoxometalates and carbon materials have a weaker activity/performance in acidic media?

I am testing now some doped N and S doped carbon nanomaterials alone and immobilized in POM for the purpose of developing a nanocomposite that can serve as an electrocatalyst for energy-related ...
2
votes
1answer
47 views

Would a salt bridge work through which the ions could not diffuse into the half cells?

Instead of covering the ends of the salt bridge in an electrochemical cell with a membrane, one could also plug them on both sides with a conductive non-porous material, for example gold, which doesn'...
2
votes
1answer
59 views

How does a Pt and reference electrode measure the cell potential in a potentiometric titration?

I'm trying to perform a potentiometric titration to determine the redox potential of a $\ce{Fe^3+|Fe^2+}$ couple. To do this, I am using an $\ce{Ag|AgCl}$ electrode connected to an inert $\ce{Pt}$ ...
2
votes
0answers
42 views

Existence of single ion activities

I have used Davies equation to find what I believed was single ion activities and multiplied them on concentrations to define the thermodynamic dissociation constants for any kind of buffer to find ...
2
votes
0answers
31 views

How to Separate Copper Nanowires in an Alumina Membrane

So, in my Chemistry Lab we had an experiment to use Whatman alumina membranes and GaIn eutectic to create Nickel nanowires through electrodeposition. So essentially Nickel wire electrode and alumina ...
2
votes
0answers
83 views

The effect of the voltage at the Downs cell

I referred the Wikipedia and Advance Chemistry by Philip Matthews, for having a much comprehension on the down cell, but there was a opposition while reading the both references. Wikipedia states ...
2
votes
0answers
42 views

Why are signals broadened in polarography?

In the attached polarogram from Heyvrovsky's 1959 Nobel lecture, transitions from one plateau to the next are smoothened out rather than sharp and abrupt. Why is that? I understand that currents were ...
2
votes
1answer
315 views

What does the osmotic pressure do in an electrolytic solution?

I have learnt that in an electrochemical cell, the osmotic pressure in the solution hinders the flow of ions from the electrode to the solution, rather some ions may accumulate on the electrode ...