Questions tagged [distillation]

For questions about the process of distillation. For the distillation process used in metal refining, also use the [metallurgy] tag.

Filter by
Sorted by
Tagged with
4
votes
0answers
104 views

Distilling milligram quantities of oil like it's late 1970s

In a currently retracted* manuscript by Tomas Hudlicky [1, Retraction Watch] the following has been noted: Fifty years ago professors took an active part in all laboratory instructions and they ...
0
votes
1answer
42 views

can i use an isobutane stove (like jetboil) or butane blowtorch with borosilicate glass?

I don't have a bunsen burner, but have a camping stove (similar to https://www.amazon.com/Stansport-183-B-Isobutane-Backpack-Stove/dp/B004EPWM5S) and a blow torch. I'd like to do some distillation ...
0
votes
0answers
81 views

When exactly does the first drop of distillate appear in a distillation?

The below image (source: here) is from a fractional distillation of a mixture of two liquids, one with a boiling point of 69 degrees celsius and the other with a boiling point of 98 degrees celsius. ...
1
vote
0answers
30 views

Reason for rounded fitting at the top end of Allihn Condenser

I am purchasing an essential oil distillation setup. The Allihn Condenser at the top end, and the attached glassware, are rounded. It is supposedly 24/40. I have never seen this. If one of them broke, ...
0
votes
1answer
42 views

Why is the composition of a liquified vapor the same as that of the vapor?

In Organic Chemistry Lab Techniques (Nichols), I found this diagram. I understand that when going from Point $a$ to Point $b$, the composition becomes richer in the more volatile component (component ...
1
vote
0answers
37 views

How to handle CO2 being evolved during vacuum distillation?

Setup: vacuum aspirator pump, distillation apparatus with stirring (instead of a bubbler). Partial vacuum around 5" Hg. What would you suggest to hold the vacuum set-point?
0
votes
1answer
67 views

Why does adding salt to water help distillation?

I've been looking at instructions on how to get lanolin from fleece and a lot of the instructions mention that adding salt to the water before distillation will increase the lanolin yield. Why is this?...
1
vote
0answers
22 views

Azeotropic Distillation - Am I interpreting this VLE diagram correctly?

I've been looking at ways to re-concentrate a formic acid-water binary mixture with the VLE diagram below. Am I correct in saying that to concentrate a solution of say , 40% formic acid by weight I ...
0
votes
1answer
86 views

Distillation of methanol and water - Temperature Change

We tried the synthesis of methyl benzoate in the lab via the Fischer Esterification reaction with excess starting methanol. After 1 hour of refluxing the reactants we immediately set up a simple ...
2
votes
1answer
53 views

Does the distillation of alcohol cause the fractioning of isotopes and carbon-12 enrichment?

In water, distillation causes fractioning of the $\ce{^{18}O}/\ce{^{16}O}$ oxygen isotopes (Wikipedia). Does something similar happen to the $\ce{^{13}C}/\ce{^{12}C}$ and possibly $\ce{^{14}C}$ ...
1
vote
0answers
45 views

Distillation of oxalyl chloride

May I use water as a condensing medium while distilling out oxalyl chloride? As oxalyl chloride reacts with water and the products are $\ce{HCl},$ $\ce{CO}$ and $\ce{CO2},$ when there is a leak or ...
0
votes
1answer
60 views

When to use chromatographic separation vs vacuum-assisted rectification distillation?

I'm trying to understand a bit more about industrial scale separation processes. One particular element I'm interested in is the question as to when chromatography (HPLC or Simulated Moving Bed) may ...
-1
votes
1answer
102 views

Will there be some ethanol evaporating before the boiling point of azeotrope? And will it bring some water with it because of the hydrogen bond?

Before the specific temperature, even if the temperature doesn't reach the boiling point of azeotrope or ethanol or water, we know that there are still some ethanol evaporate. In this time(before the ...
1
vote
1answer
79 views

Will distillation do the job of purifying the water?

I asked about my sophisticated water purification system for a generation ship on Worldbuilding Stack Exchange, and somebody mentioned this: If you're gonna go to all the trouble of distilling it, ...
0
votes
1answer
40 views

Separate less volatile component from distilling a mixture [closed]

Is it a strict rule that when we boil a mixture of two liquids, with one being less volatile than the other, the more volatile vapour has to form the greater portion of the total vapours? If it is so,...
0
votes
2answers
142 views

Can you heat something at alcohol bath?

I have a mixture of $\ce{Et2O},$ $\ce{EtOH}$ and water, and I want to distill off the ether. I am using a water bath so not much water is distilled over, as the boiling water is 100 °C, and the ...
1
vote
2answers
213 views

Glass joint stuck in flask

I am doing distillation using system of glassware including a flask and a glass joint. Recently I've faced a problem: the glass joint stuck in the flask. I tried to remove it but it broke and hurted ...
0
votes
1answer
71 views

Why does steam distillation work?

I'm aware that there is a similar question here but it didn't really answer my specific questions. I understand that steam distillation is used to separate an insoluble liquid from an aqueous solution,...
0
votes
1answer
69 views

What are the components of a labware setup for short-path distillation?

I've recently become interested in short-path distillation and have found that most kits are in the thousands of dollars. So I thought that I would compile the labware myself. I understand the theory ...
0
votes
1answer
362 views

Can I determine purity of isopropanol with a hydrometer?

Assuming I start with a known 99.8% purity of isopropanol, after recovery with a distillation apparatus, could I use a hydrometer to test for water content? If so, is there a special one I should use?
2
votes
0answers
59 views

Is there a way to form only ortho product without using fractional distillation?

Using benzene and ethane as your only source of carbon in the final molecule, synthesize the following using any useful reagents. Reaction must form pure ortho compound. I have to form the product ...
-2
votes
1answer
775 views

Is 99% Isopropyl Alcohol sold in stores really 99%?

My understanding is that an azeotropic mixture of isopropanol and water is 91%. This makes sense as to why there are so many brands of rubbing alcohol sold at 91%. There are also some sold as 99%, ...
1
vote
2answers
293 views

At what position in the distillation apparatus does the temperature match the boiling point of the distilled substance?

A student is separating $\ce{CHCl3}$ (bp = $\pu{61 ^{\circ}C}$) from $\ce{CHCl2CHCl2}$ (bp = $\pu{146 ^{\circ}C}$) by distillation. She has just begun to collect the first distillate in the receiving ...
3
votes
1answer
122 views

Distillation: temperature not reaching azeotrope boiling point

I ran a simple distillation of $\ce{HBr}$/water mixture because I wanted to purify it. Boiling point of azeotropic hydrobromic acid is approx. $\pu{124 ^\circ C}$, however my distillation ran almost ...
0
votes
2answers
1k views

Use of fractional distillation in organic chemistry [closed]

Can fractional distillation be used to distinguish between: 1) d/l form of a compound 2) geometrical isomers of a compoun (Cis and Trans)
1
vote
2answers
122 views

Why we don't we save water by boiling the contaminated water to get the pure steam?

I see lot of drinkable water wasted in household and industrial activities, water usually gets contaminated with detergents(and other household materials),chemical effluents released from factories . ...
3
votes
1answer
361 views

Why is ethanol distilled off before adding water in the first step of a malonic synthesis?

I am doing a malonic synthesis shown below, and I wonder why I should distill ethanol off before adding water in the first step of the reaction (First I add absolute ethanol and solid sodium).
2
votes
1answer
53 views

Removing water/moisture from car exhaust [closed]

I know that car exhaust is almost entirely nitrogen, water and carbon dioxide. How would I go about removing the water? Would I have to condense it off? Any devices already exist for doing so?
2
votes
1answer
70 views

Double surface in the pressure temperature concentration curve for a binary mixture

In the 3 dimensional diagram given, when a constant pressure plane intersects with the double surface, it produces a looped curve without a maxima or minima. What is the double surface and how is the ...
0
votes
1answer
250 views

Last step of nicotine extraction using DCM

After using hydro-distillation method with distilled water and NaOH, separating the extract with dichloromethane, distillate it at 40 °C/104 °F, I'm left with some yellow pale oil. I'm just wondering ...
0
votes
1answer
154 views

What is the difference, if there is, between this two distillation methods?

Reading about water vapor distillation, I found two differents approaches: Direct one Indirect one. The first has an arrange like: Here the chamber contains water and the plant. It is cooled and ...
3
votes
0answers
87 views

Do theoretical plates required to obtain a pure product decrease under vacuum distillation?

For this question I am using Ethanol as an example. The following is the vapor-liquid equilibrium diagram for Ethanol under atmospheric pressures. Under reduced pressures do the number of theoretical ...
2
votes
0answers
34 views

What is the future of water treatment, and why we don't use enough purified sea and freshwater? [closed]

I understand thermal and membrane distillation are very expensive and that slowed down their usage, but now we can bring 100% clean energy to power them. Except the set-up, the price of materials and ...
3
votes
1answer
1k views

Isopropyl alcohol still leaves evaporation residue after distillation

I just finished distilling two liters of IPA because evaporating 5 ml on a watch glass revealed it to contain quite a bit of dissolved impurities. However, it still leaves some residue, even though I ...
1
vote
0answers
81 views

What causes both components of a binary gas mix to condensate at the same time for a given composition

Okay, so recently I encountered the temperature - mole fraction diagrams for binary vapour-liquid equilibrium. For now, I only consider two-component systems where the components are very similar and ...
8
votes
2answers
1k views

Enrichment of D2O

The Wikipedia page for deuterium oxide (heavy water) says that its boiling point is 374.5 K and the one for ordinary water is 373.13 K. Is there a way of distillation which we can use to enrich ...
1
vote
1answer
37 views

Vapour-Liquid Equilibrium

I have been studying flash distillation, and I am reading the VLE tables my textbook has provided. I am looking at these tables and I am not understanding the data, I think. Why is the vapour mole ...
9
votes
2answers
380 views

Do light and heavy water form an azeotrope?

(Interested in the general principle too, not just for water and its variants, but with particular emphasis on it.) When you distill a weak ethanol-in-water solution, you get a condensate that's ...
2
votes
0answers
54 views

Is it possible to fractionally distill a compound made up of substances with very similar boiling points?

Let's say I have a solution that is made up of substances that have very similar boiling points, say less than 5 degrees apart. Is it even possible to fractionally distill those substances, say, using ...
2
votes
1answer
119 views

What is this glassware between flask and condenser to collect liquid?

I've been trying to identify this piece of glassware for ages now. I've been combing the internet and can't seem find anything similar. It looks like some kind of adapter/collecter/trap that sits on ...
1
vote
0answers
36 views

Distillery Transfer Hoses

I was hoping an actual person could offer me some advice. I work in a craft distillery and I'm getting a lot of mixed information on how compatible PVC is with high-proof alcohol. It definitely seems ...
0
votes
0answers
385 views

Column pressure control in distillation

In the industry , it's important to maintain the column pressure control in the distillation column . " Pressure alterations will alter column vapour loads and temperature profiles. . So when using ...
0
votes
1answer
3k views

Distillation of aniline/water mixture

I read from a source that aniline and water can be separated by steam distillation. But isn't this senseless as steam distillation will simply add more water and make separation more difficult?
0
votes
1answer
861 views

How can I remove water vapor from an airstream without a cold trap?

I'm trying to perform vacuum distillation at home with a rotary vane vacuum pump. In order to not ruin my vacuum pump, solvent vapor (in my case, water) should be removed from the air before it ...
4
votes
2answers
7k views

How to increase the concentration of HCl

Today I have purchased some $\ce{HCl(aq)}$ on my local market with a concentration of 23%. However, I need to obtain a concentration of 37% in order to perform an experiment. Can I use distillation ...
1
vote
1answer
51 views

Can liquids be made a lot purer than by fractional distilation?

Suppose you have a fused quartz tube with one closed end coiled into a spiral with a diameter of more than 10 m and you submerge it into a mixture of water and ethanol in a way that gets rid of all ...
3
votes
1answer
69 views

How does electrophoretic separation work in terms of separating soil into minerals?

I found this diagram and would like to know how it works with soil. Google searches yield protein/biology things, anyone know how this method would work with soil?
-3
votes
1answer
143 views

Would distilling a sodium fluoride solution generate hydrogen fluoride to any noticeable extent?

If you have a solution of NaF, and you boil it (to get pure water by distillation) can the fluoride ions in water separate from sodium ions and combine with hydrogen ions to form HF? ...
1
vote
0answers
731 views

How to get anhydrous triflic acid from triflic anhydride?

I require a small amount of triflic acid, and while other research groups do not have any, I did locate some trflic anhydride. Does anyone have a published protocol for obtaining the anhydrous acid ...
18
votes
6answers
7k views

Un-denaturing industrial alcohol

I have a question regarding the denaturation of industrial ethanol with methanol to discourage its consumption. The boiling point of methanol is 64.7 °C, while the boiling point of ethanol is 78.37 °...