# Questions tagged [density]

For questions involving (theoretical or experimental) comparison of density of elements or substances, calculating density of solutions, effects of temperature on density, and other chemical aspects of density.

120 questions
Filter by
Sorted by
Tagged with
36 views

### What is the density of sodium trimethylsilylpropanesulfonate (DSS)?

I tried to look for the density of sodium trimethylsilylpropanesulfonate (DSS) online but could not find anything. Perhaps someone here measured it/knows where it may be found?
52 views

### Calculate molarity given density and mass percentage [closed]

Problem Calculate molarity of a solution of $\ce{H2SO4}$ with density $\pu{1.198 g/cm3}$ and containing $27~\%$ mass of $\ce{H2SO4}.$ Answer My approach I converted the density to g/l. Then i took ...
247 views

### Is the density of a two-component mixture always between the densities of its individual components?

There exist eutectic mixtures, in which the freezing point of the mixture is below those of either component of the mixture, i.e., the freezing point of the mixture is not intermediate between that of ...
47 views

34 views

### Sample: How to calculate mass of nanopaticles with given density and Vol % [closed]

I'm trying to calculate the wt% and the mass of the nanoparticles in a ferrofluid solution. Attached is data from the supplier: ...
303 views

### How to reduce surface tension of oil?

I would like to create tiny colored drops slowly falling down in a transparent liquid. The diameter of the droplets must be around 2mm, and their speed must be approximately 0.5 mm / sec. For that, ...
2k views

### What is the least dense liquid under normal conditions?

What is the least dense liquid under normal conditions, room temperature, one atmosphere of pressure, doesn't combust upon contact with air, also wouldn't kill a human just for being in the same room ...
24 views

### Calculating Air Density and Effect of Air Composition

I have to calculate density of atmosphere, assuming that it is: 79% : N2 21% : O2 Does the percentage of gases affect the answer, and how can we find the density with such little information?
169 views

### Does iron nail sink in rubbing alcohol [closed]

I have been trying for so long to get answer
146 views

### When finding the liquid density which gives the most accurate results, a 25 ml Pycnometer or a graduated 10 ml cylinder?

Its 10 ml graduated cylinder with 25 ml of pycnometer, and we are measuring the density of the liquid(pure liquid) in each of the materials and we are suppose to compare the densities found , in terms ...
168 views

### How to make oil more heavy?

I would like to increase the density of a given oil (or anything that repels water) so that it is slightly heavier than water; to be able to precisely control how slow the oil would fall in the water. ...
127 views

### Determine Which has the higher density the pure liquids or solutions?

What i know that it immensely depends on their individual density, but am not really sure since doing research they was no solid answer. i just want a conformation if what am suggesting is correct.
1k views

### What is the smallest molar volume?

I wondered how small a volume a mole of material could occupy, so I started with carbon, which would need 12 grams. That's 60 carats, and there happens to be a famous 60 carat diamond. If my density/...
71 views

### Finding percentage of the gas in a binary gaseous mixture of the given density

At STP, the density of a gas in a vessel is $0.9002$. If the gas is a mixture of argon and helium, what percentage of the gas is argon? I am stuck on this. From what I can gather, the only ...
38 views

### How to make equal density pool dye without diffusion

I have a leak I have been struggling to find in my in-ground pool. I am losing about 1/4" of water per day and I believe the issue is one of the fittings in the bottom of the pool. There are two ...
2k views

### Density of d-block elements

Something that confuses me slightly is the trends in density when comparing periods 4, 5, and 6 in the d-block. Looking at periods 5 and 6, the density peaks at group 8, with ruthenium and osmium, ...
93 views

### How to determine the volume of water necessary to produce a solution with 4.9 g/l sulfuric acid?

The molar mass of sulfuric acid is $M(\ce{H2SO4}) = \pu{98.1 g/mol}$. We have $\pu{100 mL}$ of a $0.1$ molar solution of sulfuric acid. What volume $V$ in $\mathrm{mL}$ of water, $\ce{H2O}$, do we ...
85 views

### What is the actual density of CAS 7647-14-5 (NaCl, 99+%)?

I'm not a chemist by profession, so please forgive any syntactical or vernacular oversights on my part. Basically, I'm getting mixed messages from different sites about the density of sodium chloride....
496 views

### Find alloy composition by density

I have a square piece of metal from a processor heat sink that looks a lot like copper. I'm trying to find the alloy composition but I'm not sure how. I happen to have both a digital caliper and a ...
50 views

### Is there a formula for density of any gaseous substance just based on its molar mass?

$\pu{112 ml}$ of hydrogen combines with $\pu{56 mL}$ of oxygen to form water. When $\pu{224 mL}$ of hydrogen is passed over heated cupric oxide, the cupric oxide loses $\pu{0.160 g}$ of its weight. ...
226 views

### Electron Probability Density Functions

I am a mathematics and chemistry double major and I just finished my statistics requirement and a great deal of the class was spent on probability distributions (e.g. Binomial, Poisson, Geometric, ...
226 views

### What's the density of a frozen ethanol or ethanol solutions?

How can we know what's the density of ice (water), but there's no data on how much is the density of frozen ethanol? (as far as I know)
1k views

### How can I interpolate between two densities at different temperatures?

I'm trying to find the temperature of methanol ($\ce{CH3OH}$) when its density is equal to $\pu{780 kg m-3}$. I know that when $T = \pu{30^\circ C}$ the density is equal to $\pu{783 kg m-3}$, and ...
142 views

### What is the mathematical relation for the change in water density at different temperatures?

I am curious to the relation of the density of water at different temperature and as to also how one would come to an equation that took the temperature of the water and would output it's density? I ...
52 views

### Which easy-to-acquire clear liquid would be best for testing whether or not a twenty-sided die is balanced?

In another question on another stack, I asked if the Saltwater float present in a specific youtube video was capable of determining any differences in mass between the faces of a die in determining ...
1k views

### Calculating the density of a saturated salt solution

Is there a way to calculate the density of a saturated salt solution from the solubility limits or does it have to be experimentally determined? First instinct, is to add the mass of the salt to ...
41 views

### Concentration of electrons in silicon sample with a phosphorus dopant

I'm studying electrical and computer engineering and all I remember from chemistry is from high school. We have a $\ce{Si}$ sample and we want to replace one in every million atoms with a phosphorus ...
517 views

### Calculating mass from just density? [closed]

So I just started chem 101 and I'm not sure how to solve this problem. This is a problem from the dimensional analysis section of our book. It seems like the question wants me to get mass purely from ...
487 views

### Isotopic mass to density

I want to figure out/calculate the density ($\pu{g/cm3}$) of the various isotopes, here $\ce{^109Ag}$. I know it's isotopic mass is $\approx109$ and calculated the number of particles/gram. But I ...
1k views

### Converting mass percentage of a solution into its density? [closed]

Is there a way of converting mass percentage of a solution to obtain its density? (With mass percentage been given and the compounds which are mixed to form the binary solution)
1k views

### What are these “certain chemical compounds” denser than osmium?

The Wikipedia entry for density states Osmium and iridium are the densest known elements at standard conditions for temperature and pressure but certain chemical compounds may be denser. I ...