Questions tagged [combustion]

For questions about the combustion of an organic molecule or inorganic substance. Do not use this tag if your question is about the [stoichiometry] of a combustion reaction, or for the calculations of [thermodynamics] functions (like enthalpy change).

Filter by
Sorted by
Tagged with
-3
votes
0answers
34 views

How to super purify mineral oil so that it can burn without producing smoke? [closed]

Can someone help me with figuring out how to use mineral oil as the fuel for an indoor candle? I'm dipping fibre-glass wicks in mineral oil, which is transparent, but I have no idea of its purity/...
-2
votes
0answers
14 views

Combustion Reaction [closed]

A Gaseous Hydrocarbon of 20ml is added with excessive Oxygen and combustion is done.After that the mixture of the gaseous product was 50ml.Then CaO was added and volume reduced to 10ml.What was the ...
1
vote
1answer
29 views

Why constant volume combustion gives higher energy than constant pressure?

I have noticed when I have done some combustion equilibrium that enthalpy is higher when doing a constant volume combustion than pressure constant combustion. Why is it so ? What are the reasons ...
3
votes
0answers
48 views

Why do nitrogen-containing organic compounds give N2 as the combustion product?

My teacher gave the explanation stating that consider that first the nitrogen in lower state is oxidised to $\ce{N2}$ and then the further oxidation would stop as the $\ce{N-N}$ bond energy of $\ce{N2}...
0
votes
1answer
49 views

Why does charcoal not produce smoke when heated?

As I understand; the reason we have smoke in a fire is because the heat causes wood (or whatever material is burning) to dis-integrate, the disintegrated components react with oxygen to create more ...
-1
votes
1answer
17 views

Finding Gibbs energy at different temperatures just given Gibbs energy at one temperature

How would it be found the Gibbs energy at a certain temperature, if they just give you another Gibbs energy at a temperature? For example: Given $\Delta G = -230 Kcal/mol$ at $773K$ for the reaction $...
-1
votes
1answer
32 views

Is incineration of a solid fuel complete or incomplete?

If I have some solid material like biomass and incinerate it at 1000 Celsius degrees for 15 minutes in an oxidized atmosphere within an incineration oven. As an output it gives me ash. Is the ...
2
votes
0answers
23 views

Verify heat produced by flame using enthalpy of fomation

I'm simulating using a CFD solver a pure oxygen/methane flame. However, I doubt that the combustion model does not produce enough heat. The heat from reaction is defined by $S_h=-\sum_{j} \frac{h_j^0}{...
0
votes
1answer
43 views

What is change in internal energy of a system in which combustion occurs at constant temperature?

We got a question in a test, in which we were asked which system has zero change in internal energy and it had an option which was combustion of methane at constant temperature. I imagined this to be ...
1
vote
0answers
78 views

What causes little spikes in a flame? [closed]

I have a lighter at home which everytime I use it, generates little spikes (see picture below) which eventually disappear. The Spikes are not an effect generated by the camera. I can confirm that ...
7
votes
5answers
583 views

Why do different substances containing saturated hydrocarbons burns with different flame?

LPG and Candle wax both contain saturated hydrocarbon, yet LPG gives a clean white flame but a candle gives yellow flame with lots of smoke. Why so? I have read some answers on web which says that it ...
16
votes
2answers
3k views

Why doesn't NASA or SpaceX use ozone as an oxidizer for rocket fuels?

Presumably, it would be expensive to use ozone ($\ce{O3}$) as an oxidizer instead of $\ce{O2}$, but would the extra oomph be worth it? Does $\ce{O2}$ provide as much thrust/energy/heat as can be ...
1
vote
0answers
52 views

Why is gasoline consisting of heavily branched alkanes better fuel than gasoline consisting of more linear alkanes? [duplicate]

As far as I know, the reason isooctane is better than octane in gasoline engines is because the octane is more prone to ignition by pressure. This makes it ignite when it is not supposed to, which ...
0
votes
1answer
70 views

Combustion of NaCl(aq) when testing conductivity

In a experiment that dealt with electric conduction of many concentrated solutions, NaCl(s) created an unknown, to me, substance after adding a drop or two of water. Furthermore, it isn't the reaction ...
1
vote
0answers
20 views

Where can I find the released combustion energy in NASA CEA rocket problem?

I am using NASA CEA program for a study project. I have read the CEA Nasa user's manual over and over, yet I haven't found an answer to my question which is : where can I found in the output of NASA ...
-1
votes
1answer
87 views

Combustion of methane and ethane

I'm having trouble with the following problem: A gas fuel of Methane ($\ce{CH4}$) and Ethane ($\ce{C2H6}$) is burned with atmospheric air, and the volumetric analysis of the products of combustion ...
0
votes
1answer
20 views

Viability of reduction of oil paint binder and solvent flammability upon disposal via addition of water

As an artist, when disposing of a paper towel or cotton rag containing oil paint, turpentine, odorless turpentine substitute or mineral spirits at the end of a painting session, I generally pour water ...
0
votes
0answers
25 views

rate of combustion of alcohols and hydrocarbons in relation to the number of carbons in the chain

I understand that the heat released when burning alcohols is greater as long as the number of carbons in the alcohol chain is increased (i.e the enthalpy of butanol is greater than propanol > ...
3
votes
1answer
83 views

How or Why does diesel/kerosene have a much higher 'flash point' but lower auto/self-ignition point than gasoline/petrol?

This is a very common question, but I have yet to find a good theoretical answer to both questions (diesel has higher flash point BUT lower spontaneous ignition temp.)
-3
votes
2answers
118 views

Controlled burn with colored flames (Gender Reveal) [closed]

Is there a single solvent that can dissolve chemicals/elements that when burned, will produce the color of its respective chemical/element? If so, what chemical/element can be dissolved in this ...
3
votes
2answers
244 views

Calculating the amount of oxygen in a glass using candle burning time

I would like to calculate the amount of oxygen or concentration of oxygen in a glass or conical flask using candle burning time. I am thinking of a simple way to calculate this based on the fact that ...
-3
votes
1answer
57 views

What is the opposite of a catalyst and examples? [duplicate]

I remember a while ago I heard of something that slowed reactions and was effectively the opposite of a catalyst. What is this called? Also would appreciate examples and an explanation of their uses ...
8
votes
2answers
835 views

Could blue flames arise within the hull of a burning ship?

In Joseph Conrad's Youth: A Narrative, set in 1876, a 400-ton barque ship, the Judea, is sent to Java Head to transport 600 tons of coal. Although various delays occur during its journey, the coal it ...
3
votes
1answer
168 views

What is the significance of heating value?

Say I burned for example methane and propane to boil some water. Methane has the heat of combustion of $\pu{890kJ/mol}$ and propane has the heat of combustion of $\pu{2200kJ/mol}$ What does the ...
3
votes
2answers
102 views

Is oxygen enrichment energy efficient in some combustion engine?

I wonder if a combustion engine with oxygen in air as oxidant can be net energy efficient by oxygen enriching the air before using it? This is the same as asking if the net mechanical energy output of ...
9
votes
4answers
1k views

On heating in the Earth's atmosphere, can magnesium react with nitrogen to form magnesium nitride?

This question is derived from a question asked in my school test. What happens when a magnesium ribbon is heated in air? My first response was the formation of magnesium oxide $(\ce{MgO})$ when ...
1
vote
0answers
23 views

How to get the right formulas for combustion (rocket chamber) or where to find them? [closed]

I am a space enthusiast and am intrigued mostly by rockets. I recently found a book HOW to DESIGN, BUILD and TEST SMALL LIQUID-FUEL ROCKET ENGINES and have been fiddling around with rocket engine ...
3
votes
0answers
81 views

Can old matches combust spontaneously?

I came upon this box of matches, it's probably from a little before 1900 and has significance for my family history, and I would like to add it to my "box o' historical items" but I'm concerned about ...
0
votes
2answers
144 views

Is reduction of copper oxide a combustion reaction?

Is the following reaction a combustion reaction or just a single displacement? Could be both? $$\ce{H2 + CuO -> Cu + H2O}$$ A friend of mine claims it is a combustion reaction because it is ...
1
vote
1answer
92 views

Water evaporation from calorimeter giving less exothermic enthalpy value?

To find the enthalpy change of combustion for an alcohol, you use a calorimeter filled with water and heat it by burning an alcohol. I was told that usually experimental values for the enthalpy ...
-4
votes
1answer
69 views

is H2O in gas form in poly styrene combustion? [closed]

original question: if we burn 390g of poly styrene (STP), how much gas produces? me: 1008L my teacher: 672L he says h2o is not in gas form!(because of STP) who is wrong?
0
votes
0answers
52 views

Why is the heat of combustion of sulphur equal to the heat of formation of SO2 and not SO3

By definition the heat of combustion for compound is equal to the energy that is released on complete oxidation of one mole that substance to its highest oxidation state. In case of sulphur, online I ...
8
votes
2answers
739 views

How is octane rating defined for negative values and those over 100?

Based on my reading, the octane rating for a given fuel is calculated by finding the compression ratio at which it knocks and finding a mixture of $X\%$ isooctane and $(100 - X)\%$ n-heptane which ...
0
votes
0answers
31 views

Determining amount (in mols) of oxygen needed to fully combust coal

I'm trying to calculate the amount of oxygen needed to fully combust some coal. As an example, assume I have $\pu{1 kg}$ of coal which is, by mass fraction, 60% carbon ($\ce{C}$) 40% hydrogen ($\ce{...
3
votes
1answer
73 views

Risks of burning melamine formaldehyde adhesives [closed]

Background- I make biochar for gardening, and small scale carbon capture and storage. Most of my feedstock is clean, unpainted, untreated, end of life timber, but there is a small proportion of ...
0
votes
2answers
99 views

Sulfates and persulfates as accelerants in black powder?

I saw there was a few black powder posts on here so I'd like to pose a question. Would sulfates or persulfates like the oxidixer soduim persulfate be a good replacement for some percentage of the ...
1
vote
0answers
93 views

Adiabatic flame temperature of hydrogen peroxide calculation

I will first demonstrate my cursory method for evaluating the adiabatic flame temperature of H2O2 at atmospheric pressure. $$\ce{H2O2 -> H2O + 0.5O2}$$ At $\pu{1200 K}$, \begin{align} h_\ce{...
1
vote
3answers
81 views

What is the best way to make a substantial amount of soot in a high school laboratory?

I need to make about 50 grams of soot (carbon black particles) in a high school laboratory. What would be the best way to do this? The purpose of needing 50 grams of soot is because I would like to ...
-1
votes
2answers
45 views

Why does Sodium Bicarb. Reduce Combustion Rate? [closed]

In many common solid-propellant model rocket engines, Sodium Bicarbonate, $\ce{NaHCO3}$, is used to predictably regulate/limit the rate of combustion of the fuel. My questions are as follows: What is ...
-1
votes
1answer
737 views

Rocket Candy Fuel - Common Alternatives to KNO3?

I'm sort of a model rocket enthusiast, but the most common fuel for model rockets, Rocket Candy, requires Potassium Nitrate as an oxidizer to oxidize Powdered Sugar. Potassium Nitrate is not ...
0
votes
1answer
59 views

What is the characterstics of additives that it must posses to make any mixture hypergolic? [closed]

This is about hypergolicity of rocket propellant.Turpentine gave hard-start with RFNA and WFNA but excellent with mixed acid(mixture of HNO3 & H2SO4).Similarly,Furfuryl alcohol & WFNA(also ...
4
votes
1answer
513 views

Heats of combustion of cycloalkane homologues

Heat of combustion increases as the number of carbons increases, but on comparing ethyl cyclopentane, ethyl cyclohexane, andethyl cycloheptane, shouldn't you consider ring stability too? In that ...
-3
votes
1answer
928 views

Can someone help me find the limting reagent? [closed]

Okay, so for home work i was given this problem. Suppose that 8.00g of CH4 reacts with 16.00g O2 to form CO2 and H2O, find the grams of CH4, H2o, and O2 left over Balanced Equation : CH4 + 2O2 = ...
15
votes
3answers
7k views

When I burn isopropyl alcohol (IPA), it burns orange. But when I burn ethyl alcohol, it burns totally blue. Why is this?

I burned them in a small aluminium tray. While IPA is burning orange, it produced the smell of soot, but while ethanol is burning blue there isn't any smell. Also, ethanol made the tray really cold ...
0
votes
0answers
28 views

Combining enthalpies of formation and combustion in the context of Hess's law

I know that you can use enthalpy of combustion to work out formation, and Formation to work out enthalpy change. But can you use enthalpy of formation and combustion data is the same Hess's cycle to ...
1
vote
1answer
161 views

Are petroleum-based products prone to produce hard residues with black powder?

A common controversy about black powder is lubricant composition. Some people tell this is a bad idea to use any petroleum based products in such lube because it will produce hard, difficult to clean ...
-1
votes
1answer
74 views

A sealed container contains 90 % hydrogen and 10 % oxygen. There is a spark in the container. What happens? [closed]

A sealed container contains 90 % hydrogen and 10 % oxygen. There is a spark in the container. What happens? Assuming it is a 10-litre volume container like a fuel tank.
0
votes
0answers
37 views

What is the result of the combustion of the mixture?

I prepared a little experiment about solid rocket propulsion. I have used water ($H_{2}O$), potassium nitrate ($KNO_{3}$) and saccharose ($C_{12}H_{22}O_{11}$). I made the mixture in a pan by cooking ...
1
vote
1answer
67 views

How to determine the composition of a gas mixture after a combustion?

The problem is as follows: A mixture of gases consisting of $\ce{CH4}$ and $\ce{C2H4}$ is let to pass over red hot $\ce{CuO}$. Then $\pu{0.6g}$ of $\ce{H2O}$ is collected along $\pu{1.185g}$ of ...
0
votes
1answer
56 views

Is it possible to obtain the amount of air required for a combustion analysis?

I'm not very sure if the required amount of oxygen (I assume) can be found by only knowing the amounts of the produced subtances after a combustion. To illustrate this I found this problem: $1.14\,...

1
2 3 4 5
8