Archaeologists and conservators use polyethylene glycol (PEG) to replace water inside wood to protect it from shrinking and expanding with changes in humidity. But it is hygroscopic—even more so than wood, it sounds like. So how does it work? Is it like the polymer in a diaper that is able to hold on to moisture and therefore not allow any additional moisture to expand the wood further? Or is it simply filling in all the holes and its hygroscopic character is inconsequential?

  • $\begingroup$ Good question! Thanks for asking it here at Chem.SE. For more information about the site and its policies, check out the tour and help center. In particular, the page on how to format posts using Markdown/HTML may be helpful for future questions. Finally, since your question has earned you 20 rep, feel free to drop by chat and say hello! Enjoy! $\endgroup$
    – hBy2Py
    Jun 9, 2017 at 3:07
  • 1
    $\begingroup$ The main purpose of PEG is to provide osmotic pressure on lignin layers which would otherwise collapse under the absence of water. $\endgroup$
    – ankit7540
    Jun 9, 2017 at 3:28

1 Answer 1


The reason why PEG is suitable for this purpose has many reasons including the wood chemistry and degradation of wood in water.

Degraded wood usually very characteristic chemical losses. The cellulose of the wood is usually lost due to bacterial action and/or due to the action of the water itself. Over long period of time wood looses water-soluble components like starch and complex sugar like molecules to water. What remains in there is the water-insoluble component in the cell walls and wood tissues primarily consisting of lignin.

If the wood is in water, lignin provides structural stability to the wood. But wood becomes spongy and easy to break. If this wooden piece is exposed to air, water evaporated and wood becomes dry and shrinks. Most of the spaces between lignin layers is nor air, which makes it easy to break.

Here, comes in PEG. PEG is remarkable because it can dissolve in water. PEG solution has very high osmotic pressure and this is one of the reason why PEG solution treatment works. PEG seeps in the tissues and provides the required osmotic pressure to keep lignin (and wood tissue) stable. This prevents the wood from expanding and shrinkage. While treatment, it is ensured that PEG penetrates the wood tissue which takes considerable times, and water is removed from the wood. In the end a large part of the original water in wood is replaced by PEG in the tissues providing structural stability.

Coming to your point on the hygroscopic property (also known as deliquescence). Higher molecular weight PEG has lower hygroscopic property because of more alkyl chained part. So it depends on the type of PEG used. But a balance has to be made since, lower MW chains are easier to penetrate tissue.

In case the relative humidity changes, for example increases, the effect due to absorption due to PEG inside tissue is negligible. Only the PEG which is outside tissues (excess, which was not removed during PEG treatment) might cause additional increase in weight. The removal of excess PEG is usually taken care of by experts.

Still however, it is the norm that >80 % relative humidity is not good for PEG treated wood.


  1. D.W. Grattan, "A Practical Comparative Study of Treatments for Waterlogged Wood, Part II, The Effect of Humidity on Treated Wood", (Ottawa: ICOM Waterlogged Wood Working Group, 1981), pp. 243-252.

  2. Taduteru Nishiura and Setsuo Imazu, "Experimental study of the dimensional change of highly degraded waterloged wood according to ambient humidity after preservation treatement"Bremerhaven: ICOM Waterlogged Wood Working Group, 1990) pp. 107-118.

  • $\begingroup$ Thank you so much! I am creating an exhibit that includes the science behind conservation methods, and I was really struggling on how to model this for younger visitors. Your explanation makes it much more understandable and easy to adapt to a visual model. $\endgroup$ Jun 10, 2017 at 13:02

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.