I need some clarification regarding this answer given by the user @Jan.

@Jan says:

Therefore, the a priori predicted most stable configurations of certain coordination numbers are:

  • mono-, di- and tri-coordination: use 1, 2 or 3 p orbitals to form bonds; keep one lone pair in an s type orbital. (Predicted bond angle: $90^\circ$)

I could not understand the meaning of the first bullet point clearly.

I cannot agree that in mono, di and tri coordination pure $p$ orbitals are always used. Pure $p$ orbitals have bond angles of $90^{0}$. In that case, how can we explain the structure of compounds like $\ce{BF3}$ or ethene where $\mathrm{sp^2}$ hybridization is said to exist and bond angles are $120^{0}$ ?

Or did @Jan imply that we need to use pure $p$ orbitals in mono, di and tri coordination in case no hybridization takes place ? If so, how can we understand when hybridization will take place and when it will not? Please give some examples.

  • 1
    $\begingroup$ In brief: the hybridization model fails badly for hypervalent species. All have large contributions from charge-shift bonding, which leads to the actual valence electron population in the region around the central atom being $\leq 8$ in all cases. I'll post an answer with more detail when I can. $\endgroup$
    – hBy2Py
    Dec 17, 2016 at 6:11
  • $\begingroup$ Yes, those bullet points are only very brief xD They can fail quickly; $\ce{BF3}$ does indeed fail the first bullet point because I did not consider phrasing it in a way to include boron. By the way, I’m leaning towards voting to close this as too broad since the two concerns you raise should be answered in two very different ways (and they are not really conceptionally related, except for both being simplified). This is coming at the danger that the pentacoordination part may be closed as a duplicate of one of the many questions here dealing with the topic. $\endgroup$
    – Jan
    Dec 17, 2016 at 19:47
  • $\begingroup$ @Jan Umm, before you vote to close I would ask you whether the question can be edited. Should I divide the question into two or more parts ? BTW your answer to my previous question was not really clear and the bullet points are really too brief. $\endgroup$
    – user37316
    Dec 17, 2016 at 19:50
  • $\begingroup$ @Doraemonドラえもん Yeah sure you can edit! In fact, the intended way to address closed (or: ‘on hold’) questions is to edit them to make them fit again. In this case, I would suggest asking about each of the bullet points in a separate question, i.e. editing this one down to one of the two and putting the other into another question ^^ $\endgroup$
    – Jan
    Dec 17, 2016 at 19:57
  • $\begingroup$ @Jan Done. Please check if my questions are making sense, individually. chemistry.stackexchange.com/questions/64673/… $\endgroup$
    – user37316
    Dec 17, 2016 at 20:12

1 Answer 1


Yes, what I wrote on the topic in the previous question was very, very brief and while writing it I was not thinking of boron — an element that usually calls for exceptions due to it only having three valence electrons.

However nonetheless, the first thing you should do for any compound is to consider all atoms in ground state configuration and see whether you can form the required bonds from occupied orbitals in that state. Let’s take the example compounds $\ce{BF3, NF3, AsH3, C2H4}$ (tricoordinate) $\ce{CO2, H2O, H2Se, BeCl2, CH2}$ (dicoordinate) and $\ce{HCl, N2, CO}$ (monocoordinate) for the discussion. Any structural data referenced herein is taken from the corresponding Wikipedia articles.

Ideal cases

I consider the examples $\ce{AsH3, H2Se}$ and $\ce{HCl}$ to be ideal cases. Taking each atom in its ground state ($\ce{As}:{ [\ce{Ar}]}\,\mathrm{4s^2\,4p^3}; \ce{Se}{: [\ce{Ar}]}\,\mathrm{4s^2\,4p^4}; \ce{Cl}{: [\ce{Ne}]}\,\mathrm{3s^2\,3p^5}; \ce{H}{: \mathrm{1s^1}}$), arsenic has three half-filled p orbitas, selenium has two and chlorine has one. Each of these elements (except hydrogen) has a single lone pair in an s orbital and if there are further lone pairs, they are in p orbitals (arsenic has no more). Thus, we can construct $\sigma(\ce{s-p})$ bonds until all valences are satisfied.

Moving on to bond angles: well, $\ce{HCl}$ has no problems as there are only two atoms. But $\ce{H2Se}$ and $\ce{AsH3}$ also have hardly any problems since the central atoms are so large that the comparatively smaller ligands can be attached at almost perfect $90^\circ$ angles without significant steric repulsion. The bond angles repored ($\ce{AsH3}{: 91.8^\circ}; \ce{H2Se}{: 91^\circ}$) are in adequate agreement.

Ideal cases with steric distortion

The next set of examples along the route you should be going are $\ce{NF3}$ and $\ce{H2O}$. These compounds fulfil the general criteria outlined in the previous section. However, their central atoms are decidedly smaller. Thus, perfect $90^\circ$ angles are unobtainable as there would be a steric clash of the ligand atoms. The ligand atoms move apart to prevent steric repulsion; this is achieved by mixing in s-contribution into the bonding orbitals. $25~\%$ s-contribution would correspond to a tetrahedral bond angle of $109.5^\circ$ and $\mathrm{sp^3}$ hybrid orbials. The table below compares the bond angle and length data of the lighter homologues discussed here and the heavier ones discussed above (consider the fluorines in $\ce{NF3}$ to be pseudohydrogens).

\begin{array}{lcccc}\hline \text{element} & \ce{N} & \ce{As} & \ce{O} & \ce{Se} \\ \hline d(\ce{X-H})/\mathrm{pm} & 137 & 151.9 & 95.84 & 146 \\ \angle(\ce{H-X-H})/^\circ & 102.5 & 91.8 & 104.5 & 91 \\ \hline\end{array}

$\ce{CH2}$, carbene, is a dangerous case. As far as I know, no definite structures are reported (although Wikipedia mentions bond angles determined by EPR) since it is too reactive and since it is susceptible to dimerisation to form ethene. It also comes in three distinct forms: a singlet form, a linear triplet and a bent triplet. The most ideal structure of these three is the singlet carbene, which also fits nicely into this subsection.

For a singlet carbene, you would also start off from carbon’s ground state $[\ce{He}]\,\mathrm{2s^2\,2p^2}$. The two p orbitals each form a $\sigma(\ce{s-p})$ bond to the hydrogen atoms. The two hydrogens, however, need to move away from each other to ease steric repulsion; thus a little bit of s-contribution is mixed in for a final bond angle of $102^\circ$. A third p orbial remains unoccupied — note the similariy to $\ce{H2O}$ which has everything carbene has plus two electrons in a p-type lone pair.

Practically ideal cases which naturally lead to multiple bond

Herein, we shall discuss $\ce{N2}$ and $\ce{CO}$. For both, we can apply the method outlined above; I’ll start with the simpler $\ce{N2}$ case. We initially have one s lone pair and three, singly occupied p orbitals on each nitrogen. One of these forms a standard $\sigma(\ce{p-p})$ bond with the other nitrogen. Now, thankfully, the other p orbitals are nicely aligned and fit perfectly for generating two $\pi(\ce{p-p})$ bonds. Together, that gives us three bonds or a triple bond, composed of one σ and two π bonds.

The carbon monoxide case is essentially the same except that carbon would have one empty p orbital and oxygen would have one lone pair in a p orbital; only one π bond can be formed in the way outlined above. However, the unoccupied carbon orbital and the fully populated oxygen orbital can align likewise and form what could formally be described as a second, dative π bond. That renders nitrogen and carbon monoxide isoelectronic. Note, however, that the simplification introduced herein is not able to explain the big differences between $\ce{CO}$ and $\ce{N2}$ that arise from their actually rather different molecular orbital schemes.

Cases, in which an s type lone pair is impossible

I’ve cleared away all the simple cases. If you go through the list, the only ones that remain are $\ce{BF3, C2H4}$ and $\ce{BeCl2}$ — although we might as well include linear and bent triplet $\ce{CH2}$ in here. These all have in common that assuming an s type lone pair would not allow for sufficient electrons available for bonding.

If that is the case, the simple answer always suggests hybridisation (athough the MO description does not require it and nonlocalised molecular orbitals would not support it). At least one p orbital must be mixed in to allow for the generation of enough σ bonds; yet you should always try and make the p contribution of the hybrid orbitals as small as possible (in simplified terms) as that means the s lone pair ‘loses’ less energy en route. (Beware, the terms and images I used are inaccurate!) Any orbitals, populated or not, that are not required for σ bonds remain as p type ones. For $\ce{CO2}$ and linear triplet $\ce{CH2}$, that gives us an $\mathrm{sp}$ configuration of the central carbon with two unused p orbitals; in $\ce{C2H4}$, bent triplet $\ce{CH2}$ and $\ce{BF3}$, the central atoms are $\mathrm{sp^2}$ configured with one additional p orbital.

If possible — i.e. in $\ce{CO2}$ and $\ce{C2H4}$ — π bonds should then be formed. Each of the oxygens in carbon dioxide has one p-type semipopulated p orbital available for a π bond as does the second carbon of $\ce{C2H4}$. The carbenes cannot form π bonds due to the lack of partners, and thus they remain as diradicals. The linear one has two degenerate p-type radical orbitals, the bent one almost has an $\mathrm{sp^2}$ type radical orbital and one p type. (In fact, bent triplet carbene has a larger bond angle than the $\mathrm{sp^2}$ predicted $120^\circ$. This is in line with removing part of the s contribution of the radicals and supplying that to the bonding orbitals. Nobody expects you to correctly analyse the structures of carbenes, though.)


You may have noticed that that element had gone missing at the end of the previous section. This is because it is the most special of all cases. All other alkaline earth metals behave as metals (form dications and practically ionic structures) while beryllium still features notable non-metal properties.

I think that the best description of $\ce{BeCl2}$ is via a four-electron-three-centre bond akin to $\ce{XeF2}$. That again requires an unhybridised central atom. The lowest of the three relevant MOs of the 4e3c bond would be formed of the fully bonding $\mathrm{p}(\ce{Cl}) + \mathrm{s}(\ce{Be}) + \mathrm{p}(\ce{Cl})$ combination; the second bonding MO would then be $\mathrm{p}(\ce{Cl}) + \mathrm{p}(\ce{Cl})$ where the nodal plane traverses $\ce{Be}$ — mixing in its 2p orbital probably increases the bonding character — and a final antibonding $\mathrm{p}(\ce{Cl}) + \mathrm{s}(\ce{Be}) + \mathrm{p}(\ce{Cl})$ orbital wherein the phase of beryllium’s orbital is of opposite sign with respect to the chlorine orbitals’. If that is the case, it should possibly be discussed with the ‘hypervalent’ cases of the other question.

I could be terribly wrong, though. Thankfully, nobody will request you to predict the MO scheme of $\ce{BeCl2}$ until at least the final bachelor’s examination.


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge that you have read and understand our privacy policy and code of conduct.