# When are two orbitals orthogonal?

When are two orbitals considered to be orthogonal?

It will be helpful if you can provide an example molecule (or molecular orbitals in a molecule) since I can't really think of a scenario where molecular orbitals can be exactly 90° to each other.

I'm not well-versed in quantum mechanics, so would prefer a simple answer - but all explanations are welcome.

• Orbital means one-electron function. Typically their orthogonality is made by construction. – Rodriguez Dec 14 '16 at 4:18

One atomic (or molecular) orbital is said to be orthogonal to another atomic (or molecular) orbital if there is no interaction between the electrons in one orbital with the electrons (wavefunction) in the other orthogonal orbital.

Acetylene is an example of a molecule in which the two pi bonds are orthogonal to each other (see the light-blue pi bond and the purple pi bond in the figure below). The two pi bonds are perpendicular to each other and there is no interaction of the electrons in one of acetylene's pi bonds with the electrons in the other pi bond. By the same token the two p orbitals on one of the carbons are also orthogonal to each other. The electron in one p orbital does not interact with the electron in the other p orbital on the same carbon.

In ethylene the pi bond is orthogonal (perpendicular) to the sigma skeleton as shown in the figure below. Since the orbitals are orthogonal there is no interaction between the sigma and pi electrons (wavefunctions). On the other hand, orbitals that interact and form a bond are not orthogonal. The two ${sp^2}$ orbitals on the two carbons in ethylene that overlap to form the $\ce{C-C}$ sigma bond are not orthogonal; the electrons interact and form a bond.

• This answer leads to impression that orthogonal orbitals must not overlap, but it is wrong: e.g. $1\mathrm s$ and $2\mathrm s$ orbitals overlap considerably, but are orthogonal. – Ruslan Dec 14 '16 at 18:42
• @Ruslan Thanks for clarifying. I've edited the answer accordingly, hopefully it reads better now. – ron Dec 14 '16 at 20:20
• @Ruslan Related question and answer here. – hBy2Py Dec 14 '16 at 20:35
• I think it is wrong to say that the electrons in the pi bonds in acetylene do not interact. – Martin - マーチン Sep 1 '17 at 9:27

Unfortunately, the sense in which orbitals are orthogonal is more or less impossible to define rigorously without recourse to functions of some kind. So, I'll give an explanation a shot using some simple, 1-D functions to illustrate the concept, followed by the pictorial orbital example you've asked for.

At a basic level, in order to have any two functions be orthogonal, you need to define a "mixing rule" for them. The most useful mixing rule for orbitals turns out to be integrating the product of the two functions$^\dagger$ over some defined domain.

So, consider two real 1-D functions, $f(x)$ and $g(x)$, defined over an interval $x=[a,b]$. The mixing rule $\Pi\,_a^b\!\left(f,g\right)$ I'll define as follows:

$$\Pi\,_a^b\!\left(f,g\right) \rightarrow \int_a^b{f(x)g(x)\, dx}$$

Simply put, two functions $f(x)$ and $g(x)$ are orthogonal under the mixing rule $\Pi\,_a^b$ (or any other mixing rule!) if and only if $\Pi\,_a^b\!\left(f,g\right) = 0$.

A pretty standard example of two orthogonal functions in this framework would be the following:

\begin{align*} f(x) &= \cos(2\pi x) \\ g(x) &= \sin(2\pi x) \\ a &= 0 \\ b &= 1 \end{align*}

The integral to check from the above is:

$$\Pi\,_0^1\!\left(f, g\right) \rightarrow \int_0^1{\cos(2\pi x)\, \sin(2\pi x)\, dx}$$

Since this is Stack Exchange and not a math exam, I will now cheat and just link to Wolfram Alpha to demonstrate that the above integral is, indeed, zero. Thus, on the domain $x=[0,1]$, $\sin(2\pi x)$ and $\cos(2\pi x)$ are orthogonal.

On the other hand, to pick some random examples, $f(x)=-x$ and $g(x)=\ln(x)$ are not orthogonal on the interval $x=[0,1]$.

$$\Pi\,_0^1\!\left(f,g\right) \rightarrow \int_0^1{\left(-x\right)\ln(x)\, dx} = 0.25$$

Similarly, the original two functions are not orthogonal on the interval $x=[0.2,0.9]$:

$$\Pi\,_{0.2}^{0.9}\!\left(f, g\right) \rightarrow \int_{0.2}^{0.9}{\cos(2\pi x)\, \sin(2\pi x)\, dx} = -0.0444852$$

Ok, enough with the math lesson. How does this help define orthogonal orbitals?

Well, orbitals, both atomic and molecular, are (usually) defined just as as 3-D functions over all space. If you have two orbitals $\phi\!\left(\vec r\right)$ and $\psi\!\left(\vec r\right)$ and want to know if they're orthogonal, you use a mixing rule somewhat similar to $\Pi$ above and calculate the appropriate integral. If the resulting value is zero, then the orbitals are orthogonal.

For example, consider a $1\mathrm s$ and a $2\mathrm p$ orbital (yes, these are atomic orbitals, but the principle holds for molecular orbitals, too): Here, the colors of the two lobes of the $2\mathrm p$ orbital are important: one color, say orange, represents positive function values; the other, say blue, represents negative values. For the $1\mathrm s$ orbital, though, it's all orange, or all positive).

What happens if, per $\Pi\!\left(\phi, \psi\right)$, you center these two orbitals on top of one another, multiply their values together, and integrate over all space? Well, the half of the $\mathrm p$ orbital that is positive will result in positive contributions to the integral of $\Pi$, and the half of the $\mathrm p$ orbital that is negative will provide negative contributions to the $\Pi$ integral. And, further, due to the spherical symmetry of the $\mathrm s$ orbital and the reflection symmetry of the $\mathrm p$ orbital, those two positive and negative contributions will exactly cancel. Thus, the $1\mathrm s$ and $2\mathrm p$ atomic orbitals are orthogonal.

Epilogue: So, given all of this, why do we also say that vectors that are $90^\circ$ from one another are orthogonal?

Well, it just involves a different mixing rule (the domain is implicit, deriving from the dimensionality of the two vectors, which must be the same):

$$\Gamma\!\left(\vec v_1, \vec v_2\right) \rightarrow \vec v_1\cdot\vec v_2$$

Under the (extraordinarily common) mixing rule $\Gamma\!\left(\vec v_1, \vec v_2\right)$, the two vectors $\vec v_1$ and $\vec v_2$ are said to be orthogonal when $\vec v_1\cdot\vec v_2=0$.

Note: In theory, I could have just linked to this question on Math.SE. However, none of the answers there were really couched in suitably readable terms.

$^\dagger$ Technically, integrating the product of one function with the complex conjugate of the other: $\int_a^b{f^*(x)g(x)\,dx}$

• Nice answer. I'm with you saying that explaining orthogonality without at least some formulas really don't make sense. – Fl.pf. Dec 14 '16 at 5:30
• See also my answer on What does orthogonality mean in function space? question at Math.SE for a bit of illustration of the concept. – Ruslan Dec 14 '16 at 20:09
• Regarding the epilogue: I gave up on maths some years ago, but from what I understand, if one generalises to "infinite-dimensional vectors" the sum in the dot product becomes an integral, and the generalisation to a complex vector space results in the complex conjugation. So the dot product can actually be thought of as a special case of the inner product. – orthocresol Sep 1 '17 at 8:02
• You're exactly right, @orthocresol. I'm pretty sure these can all be considered Hilbert spaces, where continuous functions are of an infinite-dimensional character. – hBy2Py Sep 1 '17 at 10:49

I wonder if you truly do mean molecular orbitals. Let's start with atomic orbitals. We model an isolated atom as having three P orbitals, each a "dumb bell" oriented along one of three perpendicular axes (x, Y and z if you like). There are other orbitals of course, such as s and possibly d, and other shells which have the same types of orbitals but with different sizes and numbers of nodes. But focusing on the three perpendicular p-orbitals (which I'm sure you've seen an image of), I hope you can see why we call them orthogonal. They don't overlap, and electrons in different p-orbitals essentially don't interact for our purposes.

Now, the spherical s-orbital sitting in the center of those p's doesn't seem "perpendicular" to them; but nonetheless, the s does not interact with the p's. So we say the s-orbital is orthogonal to the p-orbitals, just as the p's are to each other. Orthogonal here means more than just perpendicular in space, it also refers to the mathematical relationship of these shapes.

Molecular orbitals are formed when atomic orbitals overlap. Often we also include orbital hybridization in this model. Molecular orbitals tend to look a bit more complex than our familiar atomic orbitals, and you can't always perceive them as appearing physically perpendicular in space. However, as I hinted at, orthogonality is a more abstract property. In the proper mathematical context, we can still call these orbitals orthogonal, and it still has physical significance.

Here's a more detailed source that is probably on your level: https://www.decodedscience.org/atomic-interactions-wavefunctions-orthogonality-orbitals-hybridization-bonding/55459

(Though I must point out they might be using "molecular orbital" a bit too broadly, personally I think M.O.s like sigma and pi bonding and antibonding should be distinguished from the atomic orbitals of s, p, d, and f.)

Now, if you want to know why s-orbitals are spherical and p-orbitals are dumbbell-shaped, we're going to have to say the W word. ;)