2
$\begingroup$

I am using a rotary evaporator ('rotovap') in my lab mainly with dichloromethane as a solvent.

Usually between experiments I clean the receiving and boiling flasks with a brush using soap and water and finally rinse with alcohol. For the condenser I try to do the same, but it is next to impossible to brush the water serpentine.

I want to try and distil some coffee and tea for consumption, but I am afraid of any possible contaminants.

What is an efficient and safe method to clean the glassware?

$\endgroup$
  • 10
    $\begingroup$ I personally think that doing food preparation using non-dedicated lab equipment is a really bad idea, irrespective of the experience and skill of the person doing it. $\endgroup$ – Richard Terrett Sep 3 '13 at 10:02
  • 4
    $\begingroup$ Agreed! My advice for anyone who wants to use lab equipment that previously held experiments for food is don't. Even if you were a food chemist, it is still a good idea to separate work and lunch. $\endgroup$ – Ben Norris Sep 3 '13 at 10:45
  • $\begingroup$ That's one of the first safety rules: do not eat in the lab. $\endgroup$ – buckminst Sep 3 '13 at 12:38
  • 2
    $\begingroup$ You already have 3 comments to this effect, but it just can't be overstated. Please don't use labware to prepare consumables. We want you here in the future! $\endgroup$ – user467 Sep 3 '13 at 22:45
  • 3
    $\begingroup$ OK, you guys are pretty convincing. No food preparation or consumption in the lab! $\endgroup$ – Ivan P. Sep 4 '13 at 5:06
3
$\begingroup$

There's no further need to comment on the coffee maker, but you might give the following cleaning method for the condenser and the rotation tube a try:

Note that you might want to first check whether this is in accordance with local safety regulations!

  • Take a small or medium-sized (max. 500 mL) 2-neck flask (NS29 socket connects to the rotavap, NS14.5 socket is for your thumb) and fill it with max. 250 mL acetone

  • Hook it up to the rotavap, support it with your hand

  • No spinning :D
  • Start the vacuum pump
  • Close the NS14.5 socket with your thumb
  • Watch the acetone starting to boil under reduce pressure
  • Rapidly remove your thumb from from the socket and let the acetone "spit" all through the rotavap
| improve this answer | |
$\endgroup$
  • 1
    $\begingroup$ Also works quite well with a Schlenk-Flask and higher boiling solvents. $\endgroup$ – Martin - マーチン Apr 26 '14 at 14:23

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.