Superglue often sets in the tube, so I was wondering if ethanol or even water could stop it from hardening and going to waste. Ideas, anyone?

  • 1
    $\begingroup$ I doubt water would help. Water catalyzes the reaction. $\endgroup$
    – MaxW
    Oct 9, 2016 at 23:08
  • $\begingroup$ Maybe acetone might help, according to this... $\endgroup$
    – DHMO
    Oct 10, 2016 at 1:56
  • 3
    $\begingroup$ The right answers are below. I'd like to enlist you to use single serving packets, it is the best super glue related life hack I found. amazon.com/Scotch-Single-Super-Glue-AD119/dp/B00342VCGM $\endgroup$
    – Stian
    Jan 31, 2017 at 9:44

2 Answers 2


Based on what I gathered from this Wikipedia article on super glue :

Super glue is typically composed of a class of compounds called cyanoacrylates.

Cyanoacrylates are capable of taking part in this process we call "Polymerization", where chains of cyanoacrylate molecules, called "polymers" ( Poly- Many, mere- parts) are formed. Each constituent cyanoacrylate molecule in the polymer is called a "monomer" ( Mono- One, mere - part).

The chemical structure of methyl-2-cyanoacrylate:

enter image description here

Polymerization is known to occur for a number of reasons, and can follow a number of pathways. (So to keep this brief, I'll just skim over how methyl-2-cyanoacrylate polymerizes). Wikipedia provides the following mechanism:

enter image description here

Over there, the Nu bit is a common abbreviation we use for a nucleophile in chemistry. It is the presence of a nucleophile, that catalyzes the polymerization of methyl-2-cyanoacrylate.

So when you squeeze out a little superglue, how does it harden? Air around you, as well as the surface you're applying the superglue on will, inevitably, have trace quantities of water. To a small extent, water splits to provide positively charged hydrogen ions (essentially, it's just a proton) and negatively charged hydroxide ions (OH). It's the hydroxide ions that play the role of the nucleophile in the above-depicted mechanism.

So ironically, when super glue "dries out", it just transiently combined with (a part of) a water molecule. That is, as @MaxW points out in the comments, water catalyzes the "drying" of superglue.

Since it's water that causes superglue to harden/set, manufacturers go all out to make sure the packaging is water/air-tight. Ever noticed, that when you buy a tube of superglue, it has a seal at the mouth which you've gotta pierce before you can use it? That seal is what prevents the glue from drying out while it's still in the (unopened) tube. Once you pierce the seal, it's only a matter of days before a sufficient amount of water (courtesy: Atmospheric moisture) manages to seep in and render render the remaining superglue useless.

Note that in case of superglue, the manufacturers don't (typically) add anything to keep the superglue from drying...they just put on a seal and cross their fingers. Whereas your typical liquid/PVA glue is a water based emulsion. When PVA glue is squeezed out of the tube and onto a surface it, literally, "dries out" by losing water.

Once superglue is set, it is set... there's no turning back O:)

You can't revert it to usable superglue through any (simple) means.

However, since you now know that it's water that's responsible for superglue "hardening", if you want to make the superglue left in the (opened) tube last longer, store it an an air tight jar that's been packed with a desiccant, like silica gel ;)

  • $\begingroup$ Your use of the term "drying out" is dangerous. Superglue polymerises, it doesn't dry out. You would be clearer if you clarified that at the start and didn't keep using the incorrect description. $\endgroup$
    – matt_black
    Jan 31, 2017 at 17:33

This MSDS is available from Super Glue Corporation / Pacer Industial. It states that their superglue ranges from 85% to 100% ethyl-2-cyanoacrylate, which is soluble in acetone.

While it is also soluble in several other organic solvents, 99% acetone is available at you local pharmacy and clearly the most readily available and affordable to try.

Just to be clear, the solution here is to get past any of the glue that's already hardened so that you can still use the remaining glue.

Once it's hard, it will not work as glue again, and pre-mixing with acetone or anything else to prevent hardening will prevent it from working as glue in the first place.


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.