# Why is an S-S bond stronger than an O-O bond?

I'm wondering why exactly the single bond between two sulfur atoms is stronger than that of two oxygen atoms. According to this page, an $\ce{O-O}$ bond has an enthalpy of $142~\mathrm{kJ~mol^{-1}}$, and a $\ce{S-S}$ bond in $\ce{S8}$ an enthalpy of $226~\mathrm{kJ~mol^{-1}}$. This one reports the $\ce{S-S}$ bond enthalpy to be $268~\mathrm{kJ~mol^{-1}}$, but I'm not sure which molecule they mean, or how they measured it. Anyway, it's still higher than that of $\ce{O-O}$.

Searching the Net, the only justification I could find was something similar to concepts they apply in VSEPR, like in this Yahoo Answers thread with such remarkable grammar. Quoting the answer, which might have borrowed some stuff from a high school textbook,

due to small size the lone pair of electrons on oxygen atoms repel the bond pair of O-O bond to a greater extent than the lone pair of electrons on the sulfur atoms in S-S bond....as a result S-S bond (bond energy=213 kj/mole)is much more stronger than O-O(bond energy = 138 kj/mole) bond $\ldots$

Other variations of the same argument can be seen here, but it doesn't make sense, since one couldn't apply the same argument to $\ce{O=O}$ and $\ce{S=S}$. The first reference documents the $\ce{S=S}$ and $\ce{O=O}$ bond enthalpies to be $425$ and $494~\mathrm{kJ~mol^{-1}}$, respectively.

It's a bit shaky, and I'm looking for a solid explanation using MO or VB, or anything else that actually works. So, why is an $\bf\ce{S-S}$ single bond stronger than $\bf\ce{O-O}$, despite $\bf\ce{O=O}$ being obviously stronger than $\bf\ce{S=S}$?

• questions to consider: 1) is dioxygen (and disulfur) paramagnetic or diamagnetics? 2) assuming that there are lone pairs in both H2O2(H2S2) and O2 (S2) which are angles O-O-: (S-S-:) ? Feb 27, 2016 at 22:20
• Just making a wild guess, it has something to do with catenation. Sulfur has more catenating power than oxygen so, $\ce{S-S}$ bond enthalpy is higher than $\ce{O-O}$. The readings (bond enthapy) is given here - chemistry.stackexchange.com/questions/431/… Feb 28, 2016 at 3:39
• @Nilay there are no such things as "catenation power". That stuff is actually derived from the problems of this question. Feb 28, 2016 at 11:40
• I meant "catenation power" to be "tendency to catenate". Feb 28, 2016 at 18:01
• Yes @Nilay, but that tendency is something you conclude from this data, not the vice versa. It's the result, not the reasoning. Feb 28, 2016 at 18:35

TL;DR: The $\ce{O-O}$ and $\ce{S-S}$ bonds, such as those in $\ce{O2^2-}$ and $\ce{S2^2-}$, are derived from $\sigma$-type overlap. However, because the $\pi$ and $\pi^*$ MOs are also filled, the $\pi$-type overlap also affects the strength of the bond, although the bond order is unaffected. Bond strengths normally decrease down the group due to poorer $\sigma$ overlap. The first member of each group is an anomaly because for these elements, the $\pi^*$ orbital is strongly antibonding and population of this orbital weakens the bond.

## Setting the stage

The simplest species with an $\ce{O-O}$ bond would be the peroxide anion, $\ce{O2^2-}$, for which we can easily construct an MO diagram. The $\mathrm{1s}$ and $\mathrm{2s}$ orbitals do not contribute to the discussion so they have been neglected. For $\ce{S2^2-}$, the diagram is qualitatively the same, except that $\mathrm{2p}$ needs to be changed to a $\mathrm{3p}$. The main bonding contribution comes from, of course, the $\sigma$ MO. The greater the $\sigma$ MO is lowered in energy from the constituent $\mathrm{2p}$ AOs, the more the electrons are stabilised, and hence the stronger the bond.

However, even though the $\pi$ bond order is zero, the population of both $\pi$ and $\pi^*$ orbitals does also affect the bond strength. This is because the $\pi^*$ orbital is more antibonding than the $\pi$ orbital is bonding. (See these questions for more details: 1, 2.) So, when both $\pi$ and $\pi^*$ orbitals are fully occupied, there is a net antibonding effect. This doesn't reduce the bond order; the bond order is still 1. The only effect is to just weaken the bond a little.

### Comparing the $\sigma$-type overlap

The two AOs that overlap to form the $\sigma$ bond are the two $\mathrm{p}_z$ orbitals. The extent to which the $\sigma$ MO is stabilised depends on an integral, called the overlap, between the two $n\mathrm{p}_z$ orbitals ($n = 2,3$). Formally, this is defined as

$$S^{(\sigma)}_{n\mathrm{p}n\mathrm{p}} = \left\langle n\mathrm{p}_{z,\ce{A}}\middle| n\mathrm{p}_{z,\ce{B}}\right\rangle = \int (\phi_{n\mathrm{p}_{z,\ce{A}}})^*(\phi_{n\mathrm{p}_{z,\ce{B}}})\,\mathrm{d}\tau$$

It turns out that, going down the group, this quantity decreases. This has to do with the $n\mathrm{p}$ orbitals becoming more diffuse down the group, which reduces their overlap.

Therefore, going down the group, the stabilisation of the $\sigma$ MO decreases, and one would expect the $\ce{X-X}$ bond to become weaker. That is indeed observed for the Group 14 elements. However, it certainly doesn't seem to work here. That's because we ignored the other two important orbitals.

### Comparing the $\pi$-type overlap

The answer for our question lies in these two orbitals. The larger the splitting of the $\pi$ and $\pi^*$ MOs, the larger the net antibonding effect will be. Conversely, if there is zero splitting, then there will be no net antibonding effect.

The magnitude of splitting of the $\pi$ and $\pi^*$ MOs again depends on the overlap integral between the two $n\mathrm{p}$ AOs, but this time they are $\mathrm{p}_x$ and $\mathrm{p}_y$ orbitals. And as we found out earlier, this quantity decreases down the group; meaning that the net $\pi$-type antibonding effect also weakens going down the group.

## Putting it all together

Actually, to look solely at oxygen and sulfur would be doing ourselves a disservice. So let's look at how the trend continues.

$$\begin{array}{|c|c|c|c|} \hline \mathbf{X} & \mathbf{BDE(X-X)\ /\ kJ\ mol^{-1}} & \mathbf{X} & \mathbf{BDE(X-X)\ /\ kJ\ mol^{-1}} \\ \hline \ce{O} & 144 & \ce{F} & 158 \\ \ce{S} & 266 & \ce{Cl} & 243 \\ \ce{Se} & 192 & \ce{Br} & 193 \\ \ce{Te} & 126 & \ce{I} & 151 \\ \hline \end{array}$$ (Source: Prof. Dermot O'Hare's web page.)

You can see that the trend goes this way: there is an overall decrease going from the second member of each group downwards. However, the first member has an exceptionally weak single bond.

The rationalisation, based on the two factors discussed earlier, is straightforward. The general decrease in bond strength arises due to weakening $\sigma$-type overlap. However, in the first member of each group, the strong $\pi$-type overlap serves to weaken the bond.

I also added the Group 17 elements in the table above. That's because the trend is exactly the same, and it's not a fluke! The MO diagram of $\ce{F2}$ is practically the same as that of $\ce{O2^2-}$, so all of the arguments above also apply to the halogens.

## How about the double bonds?

In order to look at the double bond, we want to find a species that has an $\ce{O-O}$ bond order of $2$. That's not hard at all. It's called dioxygen, $\ce{O2}$, and its MO scheme is exactly the same as above except that there are two fewer electrons in the $\pi^*$ orbitals.

Since there are only two electrons in the $\pi^*$ MOs as compared to four in the $\pi$ MOs, overall the $\pi$ and $\pi^*$ orbitals generate a net bonding effect. (After all, this is where the second "bond" comes from.) Since the $\pi$-$\pi^*$ splitting is much larger in $\ce{O2}$ than in $\ce{S2}$, the $\pi$ bond in $\ce{O2}$ is much stronger than the $\pi$ bond in $\ce{S2}$.

So, in this case, both the $\sigma$ and the $\pi$ bonds in $\ce{O2}$ are stronger than in $\ce{S2}$. There should be absolutely no question now as to which of the $\ce{O=O}$ or the $\ce{S=S}$ bonds is stronger!

• How do we physically explain the greater antibonding nature of antibonding pi orbitals in the O-O bond? Is it due to the inter-electronic repulsions between the two dense electron clouds of the two oxygen atoms? Sep 26, 2017 at 15:08
• It's tempting to think that bonding character arises from electron-nuclear attraction and antibonding character from electron-electron repulsion, but it's not so simple. All factors (kinetic energy, potential energy) play a role in orbital energies. Even a physical explanation of why H2 is stable (i.e. why is a covalent bond stable?) isn't easy (see e.g. J. Phys. Chem. A 2013, 117, 7946), so I don't imagine it's any simpler in O2. My direct answer to your question, therefore, is "I don't know". Sep 26, 2017 at 22:47
• @orthocresol Can the same argument be used for weaker C-O single bond (~ 350KJ/mol) compared with Si-O single bond (~ 450KJ/mol)? (if you are still here, otherwise I will post a new question.) Jun 26, 2021 at 10:08
• @DeepakArya No. To get to the same MO diagram as above, you’d need to put so many more electrons onto carbon (or silicon), which doesn’t make sense chemically; no real compound has a carbon with a 3- charge. You need some other reason for that, and let me warn you against using “silicon d-orbitals” as the reason. Jun 26, 2021 at 10:38
• @orthocresol I was just wondering about typical Si-O single bond enthalpy in any compound with typical C-O bond enthalpy. I was not talking about diatomic species but single bonds as we encounter them in alcohols or Me3SiCN rxn with ketones. There the reasoin for forward rxn was given as a strong Si-O bond. Then I looked at this page (wiredchemist.com/chemistry/data/bond_energies_lengths.html) and it shows Si-O bond energy around 100KJ/mol higher than C-O bonds. Which seems weird. Either the page is wrong Or should I envoke oxygen lone pair going to empty d-orbitals of Si ;). Jun 26, 2021 at 11:02

Sulfur atoms are larger than oxygen atoms.

Pi bonds are formed by overlapping of two parallel p orbitals. The further the distance between atoms, the lesser the overlapping and weaker the bond.

But sigma bonds in case of Oxygen and Nitrogen are not strong enough because you are bringing two very small atoms (with large no. of electrons in the outer shell) too close which makes the sigma bond comparatively unstable than that of S-S bond where sigma bond is more stable due to lesser electro static repulsion of non-bonding electrons.