# Does the protective layer of Aluminum oxide form on the surface of aluminium alloys (such as Al-Zr) as well?

Aluminum is an ideal element for usage in airports. Unlike Iron, when oxygenating, there is a protective layer formed that does not allow the rest of the Al metal to oxygenate.
Does the protective layer $\ce{Al2O3}$ form on the surface of aluminum alloys (such as Al-Zr) as well as when it happens to Aluminum in its pure state?

• Welcome to chemistry.SE! Good Questions always give a background of what is being asked so that the answerer is fully determined on what to tell. The info. you provide will be helpful for other viewers of this post, even if it's something very rudimentary. Anyway, you might want to take a look at help center for usual questions about this site or this link to see how to beautify your posts. – M.A.R. Dec 26 '14 at 12:26

Pure zirconium also forms a passivating oxide $(\ce{ZrO2})$$^{(1)}$, so the AlZr alloy you mention is almost certain to form a similar protective oxide.
More broadly, a major area of research at present is in the 'alumina-forming' alloys ("alumina" is another word for aluminum oxide, $\ce{Al2O3}$), where aluminum is included in, e.g., steels or nickel superalloys, to try to achieve this passive aluminum oxide layer on the surface in high-temperature, corrosive environments$^{(2-5)}$. With materials like a stainless steel-plus-aluminum, the passive oxide scale only forms if the alloy has the right percent range of aluminum -- otherwise, the aluminum oxide ends up staying spread throughout the metal and not concentrating at the surface. If the alumina doesn't end up spread evenly over the surface, you don't get nearly as good of a protective effect.