# What is the cause for thermodynamic reversible and irreversible process?

My book defines

Thermodynamic irreversible process is defined as the process in which the changes take place rapidly, instead of occurring in successive stages with infinitesimal changes in quantities so that the system does not get a chance to attain equilibrium and there is an appreciable difference between the driving and the opposing force.

I have some problems in understanding it.

1. Which equilibrium are they speaking of?
2. Why does rapidity of the change cannot help it to attain equilibrium (how does an infinitesimal change in a reversible process help it to reach equilibrium)?
3. What does they want to mean by driving and opposing force?
• Your question is a good one. But I think the definition of irreversibility in your book is very poor. It is better to define an irreversible process as a process where the overall entropy (of system + environment) increases. An irreversible process cannot be brought back to its initial state, because that would require an entropy reduction which would go against the second law of thermodynamics. Nevertheless the entropy of a subsystem can decrease at the expense of an entropy increase of the environment, which at least offsets the entropy reduction of the subsystem. – Philipp Aug 26 '14 at 19:28
• But your second question (What does the rapidity of a process have to do with reversibility?) is much more difficult to answer in a satisfactory manner that doesn't simply lead to another question. – Philipp Aug 26 '14 at 19:34

Let me start by reiterating what @Phillip said in his comment: this is not a good definition for an irreversible processes - a better definition is:

An irreversible process is one in which the net entropy generation term is greater than zero.

All real processes are irreversible. The "process speed" comes into play when we want to make approximations for idealized systems. It turns out that one way to convert a process into a theoretically reversible one is to set the condition that it moves very slowly between thermodynamic states, so that at any given step, it is in equilibrium. The reason that this isn't a good definition for a reversible process is that there are cases where a rapid change is reversible, and cases where a very slow change is irreversible. It's just that in general use, the "very slow process" approximation is commonly used to obtain a reversible process.

Which equilibrium are they speaking of?

Typically they mean equilibrium between the system and surroundings, but it can also mean within the system itself. Equilibrium is another way of saying "maximum entropy" - the matter and energy are as "spread out" as they are going to get. If the entropy is maximized, no more can be generated. In "real life" this means the system is well-mixed and that matter and thermal energy has dissipated throughout the system - there are no temperature or concentration/density gradients. This is easier to visualize using particles instead of energy - imagine an ideal gas in one side of a partitioned chamber, where the partition has a hole in it to allow the molecules to cross into the other section: This is an example of an internal equilibrium - the particles cannot cross the system boundary, but they can reach an equilibrium within the system. An example of a system in equilibrium with its surroundings would be a container filled with water at room temperature - there are no thermal gradients across the container boundary.

Why does rapidity of the change prevent it from attaining equilibrium (how does an infinitesimal change in a reversible process help it to reach equilibrium)?

Whenever a system is perturbed, meaning moved away from an equilibrium state, it takes some amount of time to reach a new equilibrium. This amount of time is called the relaxation time. Different systems have different relaxation times, and if you make changes quickly enough, the system won't have time to relax, and therefore won't be in equilibrium. Using a piston in a cylinder as an example, if you compress the piston by a very small amount, then the pressure inside will be in equilibrium with the pressure outside almost immediately.

What do they mean by driving and opposing force?

Using the piston as an example again, in this case the driving force would be the external pressure on the piston. The opposing force would be the pressure of the gas inside the cylinder. For a very slow process, at any given time the outside pressure and inside pressure would be the same - the volume would change to make sure this is true. For a very rapid change, the gas inside the cylinder would take longer to reach equilibrium, and so the pressure outside would not equal the pressure inside - the driving and opposing forces would not be equal.

It is important to remember that these are approximations that are intended to allow us to convert really difficult (usually unsolvable) differential equations that describe non-equilibrium or dynamic systems into something that is solvable. The trade-off is that we go from a realistic, fully dynamic system to one with constraints - we treat it like a series of tiny jumps between systems that are in equilibrium. In many cases, these approximations don't affect the accuracy of the solution. However, whether or not it will is determined by the time scale of the change relative to the relaxation time of the system.

I'll try and somehow answer this backwards.

3) Driving and opposing forces: Each process is driven by some kind of 'force' (please do not understand 'force' in the traditional physical sense; it's more of 'reasoning, why something would want to do something'). For example, when having a saturated sodium chloride solution, the sodium and chloride ions that are still bound in their ion structure in the precipitate would like to dissolve, the driving force being the increase of global entropy by a greater disorder of the entire system.

On the other hand, every process also has an opposing force, that attempts to force the process back into its original state. In the case of the saturated sodium chloride solution, the opposing force would probably be something along the lines of releasing water molecules out of a solvation shell, and thereby increasing local entropy.