4
$\begingroup$

It is in pellets. And the box says main ingredient $\ce{NaOH}$ at least $30\%$ (I hope it's more). The box also says "aluminium catalyst". My goal was to take these pellets and dissolve them in water so that I would make a $1\textrm{M}$ solution of $\ce{NaOH}$.

I set everything up and most of it refused to dissolve in the solution. And the solubility for $\ce{NaOH}$ is pretty high. So I added some heat.This made almost everything slowly dissolve. Another thing was these small aluminium bits seemingly reacting and going up and down in the solution. I'm not sure if there was any gas released, but the solution definitely was not still.

I filtered it to remove the small aluminium balls. Any ideas If I have a relatively pure solution of $\ce{NaOH}$, or is it full of some other drain cleaner components. It is transparent-whiteish-little-yellowish. Filter kinda yellowish too.

What could these other components be?

Thanks

$\endgroup$
  • $\begingroup$ If it's a drain cleaner, there may be surfactants to act as detergents and possibly blowing agents to create foam (this is typically seen in the two-part cleaners where the blowing agent is in a separate compartment, and reacts to produce a gas, responsible for the foaming effect in combination with the surfactant). If you can give a full list of ingredients and/or the specific name of the cleaner you're using, it would help to give a good answer. $\endgroup$ – Greg E. Jul 15 '14 at 19:41
  • $\begingroup$ it says: jedyny oryginalny kret granulki there is no list of contents in a language I understand sadly. I guess it's pretty hopeless and I should start looking for some better drain cleaner. There must be some that are 100% pure, right? $\endgroup$ – Edza Jul 15 '14 at 19:47
  • $\begingroup$ Is this the product in question? $\endgroup$ – Greg E. Jul 15 '14 at 19:48
  • $\begingroup$ YES it is the right one. Is this magic? $\endgroup$ – Edza Jul 15 '14 at 19:49
  • 1
    $\begingroup$ Okay, luckily they provide an ingredient data sheet, and the composition looks to be very simple, so I'll write up an answer accordingly. $\endgroup$ – Greg E. Jul 15 '14 at 19:50
5
$\begingroup$

The product you've described contains the following ingredients (per the ingredient data sheet on the manufacturing company website):

  1. Sodium hydroxide
  2. Sodium chloride
  3. Aluminium
  4. Mineral oil

One possibility is that the aluminium is there to provide a foaming action, as its oxidation in the presence of aqueous sodium hydroxide liberates $\ce{H2}$ gas, per the following reaction (source):

$$\ce{2Al + 2NaOH + 2H2O -> 2NaAlO2 + 3H2}$$

The aluminium and sodium hydroxide would need to be kept separate and relatively anhydrous in the bottle to avoid reaction, so I wonder if the purpose of the mineral oil (which is hydrophobic) is to act as a moisture barrier and prevent mixing. If this is indeed the reaction that occurs, then the hydrated aluminium salts present are going to be at least somewhat soluble in solution, so I think it's improbable that what you have is pure sodium hydroxide. That said, if the quantity of aluminium is indeed small, this might not be a problem for your purposes.

$\endgroup$
  • $\begingroup$ Thank you very much. Everything makes complete sense now. $\endgroup$ – Edza Jul 15 '14 at 20:20
  • $\begingroup$ @Edza, no problem, glad it was helpful. $\endgroup$ – Greg E. Jul 15 '14 at 20:21

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.