# How to convert an XYZ file to Z-matrix?

I would like to generate a Z-matrix from the following XYZ file (C2H6dimer.xyz):

16
C2H6dimer
C    0.539202   -0.539202    1.933833
C   -0.539202    0.539202    1.933833
H    1.536064   -0.098299    1.932264
H    0.459532   -1.174264    2.816008
H    0.456405   -1.179449    1.055941
H   -1.536064    0.098299    1.932264
H   -0.459532    1.174264    2.816008
H   -0.456405    1.179449    1.055941
C    0.539202    0.539202   -1.933833
C   -0.539202   -0.539202   -1.933833
H    1.179449    0.456405   -1.055941
H    1.174264    0.459532   -2.816008
H    0.098299    1.536064   -1.932264
H   -1.174264   -0.459532   -2.816008
H   -0.098299   -1.536064   -1.932264
H   -1.179449   -0.456405   -1.055941


However I can't do it with the Gaussian utility called newzmat, because after typing newzmat -ixyz C2H6dimer.xyz -ozmat, I receive the following error message:

 Error in cartesian coordinates.
WANTED A FLOATING POINT NUMBER AS INPUT.
FOUND AN END-OF-LINE FOR INPUT.
16
?
Error termination via Lnk1e at Sun Jun 21 01:09:30 2020.
Segmentation fault


• Please include anything that is a prerequisite to create the problem. Am I right to assume that the program newzmat is a utility of Gaussian (which version)? – Martin - マーチン Jun 21 at 0:46
• Can you try to remove the last (empty) line? Gaussian can be very strict about empty lines in places it does not expect them. Maybe newzmat behaves similar. – Feodoran Jun 22 at 12:55

According to the manual of the newzmat utility of Gaussian 16, it accepts unadorned Cartesian coordinates (G16 online manual). The format you have posted is actually (simple) xmol. This means the first line denotes the number of atoms, the second line denotes a comment, and both need to be skipped.

Therefore your file should look like this:

C    0.539202   -0.539202    1.933833
C   -0.539202    0.539202    1.933833
H    1.536064   -0.098299    1.932264
H    0.459532   -1.174264    2.816008
H    0.456405   -1.179449    1.055941
H   -1.536064    0.098299    1.932264
H   -0.459532    1.174264    2.816008
H   -0.456405    1.179449    1.055941
C    0.539202    0.539202   -1.933833
C   -0.539202   -0.539202   -1.933833
H    1.179449    0.456405   -1.055941
H    1.174264    0.459532   -2.816008
H    0.098299    1.536064   -1.932264
H   -1.174264   -0.459532   -2.816008
H   -0.098299   -1.536064   -1.932264
H   -1.179449   -0.456405   -1.055941


In Gaussian terms, a block of cartesian coordinates is also a z-matrix. Therefore you also need to tell Gaussian to rebuild it (-rebuildzmat). This will likely fail on your input with an error:

Input z-matrix variables are not compatible with final structure.

If you allow rounding (-round) it will work. The complete command is:

newzmat -ixyz -ozmat -round -rebuildzmat <input.xyz> <output.com>


The following file is produced (it is a valid Gaussian input file):

# HF/6-31G* Test

-- No Title Specified --

0,1
C
C,1,R2
H,1,R3,2,A3
H,1,R4,2,A4,3,D4,0
H,1,R5,2,A5,3,D5,0
H,2,R6,1,A6,3,D6,0
H,2,R7,1,A7,6,D7,0
H,2,R8,1,A8,6,D8,0
C,3,R9,1,A9,2,D9,0
C,9,R10,3,A10,1,D10,0
H,9,R11,3,A11,10,D11,0
H,9,R12,3,A12,10,D12,0
H,9,R13,3,A13,10,D13,0
H,10,R14,9,A14,3,D14,0
H,10,R15,9,A15,14,D15,0
H,10,R16,9,A16,14,D16,0
Variables:
R2=1.53
R3=1.09
R4=1.09
R5=1.09
R6=1.09
R7=1.09
R8=1.09
R9=4.04
R10=1.53
R11=1.09
R12=1.09
R13=1.09
R14=1.09
R15=1.09
R16=1.09
A3=111.
A4=111.
A5=111.
A6=111.
A7=111.
A8=111.
A9=81.
A10=94.
A11=22.
A12=128.
A13=104.
A14=111.
A15=111.
A16=111.
D4=120.
D5=-120.
D6=180.
D7=120.
D8=-120.
D9=-76.
D10=-21.
D11=-144.
D12=-120.
D13=113.
D14=167.
D15=120.
D16=-120.

1 2 1.000 3 1.000 4 1.000 5 1.000
2 1 1.000 6 1.000 7 1.000 8 1.000
3 1 1.000
4 1 1.000
5 1 1.000
6 2 1.000
7 2 1.000
8 2 1.000
9 10 1.000 11 1.000 12 1.000 13 1.000
10 9 1.000 14 1.000 15 1.000 16 1.000
11 9 1.000
12 9 1.000
13 9 1.000
14 10 1.000
15 10 1.000
16 10 1.000



Whether or not this z-matrix does actually fits the purpose you are needing it for, is a different question. For the most tasks, where z-matrices are the superior input, I recommend building it by hand.

Here is a ZMAT for your XYZ coordinates:

16
C   1
C   1 1.525
H   1 1.090  2 111.141
H   1 1.090  2 111.120  3 119.9
H   1 1.090  2 111.206  3 239.9
H   2 1.090  1 111.141  3 179.8
H   2 1.090  1 111.120  3 299.7
H   2 1.090  1 111.206  3  59.7
C   8 3.216  2 130.964  1  32.0
C   9 1.525  8  85.518  2  56.3
H   9 1.090  8  56.495  2 297.1
H   9 1.090  8 161.358  2 262.3
H   9 1.090  8  72.021  2 170.2
H  10 1.090  9 111.120  8 129.0
H  10 1.090  9 111.141  8 248.9
H  10 1.090  9 111.206  8   9.1


I copied and pasted your XYZ into this: https://www.webqc.org/molecularformatsconverter.php